Also known as a motorized miter or drop saw, a chop saw is a tool that can cut a very fast and precise crosscut. They are normally used for framing and molding and are usually small and rather portable. These tools, like many other power tools around the workshop, require practice and knowledge in order to be used safely and effectively.
With this tool, the powered saw blade is brought down in a quick, precise drop that cuts the piece, which is held along a vertical piece of metal known as a fence. The fence holds the work piece at a 90 degree angle, though other angles are possible. The blade is dropped down (typically along a pre-drawn line) and the piece is cut to the exact measurements.
Miter Saw Blade
A chop saw can come with some specialized attachments that can improve its functionality. One of these, known as a compound, allows the blade's angle to be set relative to the horizontal plane, usually in a range between negative and positive 50 degrees. Another attachment, called a slide, lets the blade be moved in a long parallel cut relative to the work piece. Recent technology has allowed the use of lasers to guide the blade more precisely, and other attachments clean up dust (which is notoriously difficult to get rid of around a drop saw).
As with any sharp tool in the workshop, care must be taken to operate the blade safely and effectively. Personal protective equipment such as gloves and eye goggles should be worn at all times. Though sometimes uncomfortable, this not only can help against accidents but long term health issues such as dust getting into the respiratory system. All the safety instructions of the chop saw should be obeyed at all times. Short cuts may lead to nasty cuts.
In terms of effectiveness, many people forget that the blade itself has a diameter. Some of the wood is lost while making a cut. This may not be significant to most people, but it can throw off precise cuts. Therefore, when making a cut it is advisable to cut on the side outside of the desired length of the work piece. Also, sharpening the blade on a regular basis is recommended, as the wood can have a dulling effect on the blade itself.
Given the right amount of knowledge, a chop saw will make several tasks in the workshop a snap. Its quick cutting action will be heaven for those who have had to manually saw a piece of wood for several minutes or even hours depending upon the thickness of the wood and the sharpness of the blade.
Black Friday Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor 2011 Deals
Nov 11, 2011 15:41:59
Click for larger image and other views
Black Friday Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Feature
- Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
- Super thin laser cut kerf gives extremely fast, durable, and clean cuts
- Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up
- Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
- Tri-Metal Brazing for impact-resistant tips
Black Friday Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Overview
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri metal shock resistant brazing for stronger carbide teeth.No. D0824X: 8 1 4'' diameter, 24T, 5 8'' round and diamond knockout arbor
No. D0840X: 8 1 4'' diameter, 40T, 5 8'' round and diamond knockout arbor
No. D0860S: 8 1 2'' diameter, 60T, 5 8'' round and diamond knockout arbor
No. D1024X: 10'' diameter, 24T, 5 8'' round arbor
No. D1040X: 10'' diameter, 40T, 5 8'' round arbor
No. D1040A: 10'' diameter, 40T, 5 8'' round arbor
No. D1050X: 10'' diameter, 50T, 5 8'' round arbor
No. D1060X: 10'' diameter, 60T, 5 8'' round arbor
No. D1080X: 10'' diameter, 80T, 5 8'' round arbor
No. D1244X: 12'' diameter, 44T, 1'' round arbor
No. D1280X: 12'' diameter, 80T, 1'' round arbor
No. D1040W: 10 1 4'' diameter, 40T, diamond knockout arbor,
No. D1632X: 16 5 16'' diameter, 32T, 1'' round arbor,
No. D1660X: 16 5 16'' diameter, 60T, 1'' round arbor, , Mesquite
Black Friday Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor Specifications
For a clean-cutting blade that creates smooth finish cuts in material such as veneer plywood and delicate hardwood, look no further than the Freud D1280X Diablo 12-Inch Fine-Finish Saw Blade. This is your go-to blade for slicing through oak, pine, melamine, veneer plywood, and delicate molding. This blade's high tooth count minimizes grabbing of the workpiece, producing cuts that require little to no sanding. For strong, long-lasting resistance, the blades feature a tough steel plate and high-density carbide tips. |
 |
|
Achieving attractive results when working with fine finish material is all about clean, accurate cuts. The Freud D1280X makes this process easy, fast, and precise. To save you time, most cuts made by this blade require little to no sanding.
Trim carpenters, fine cabinetmakers, and avid do-it-yourselfers will want to keep this blade on hand for those special jobs that call for making smooth crosscuts in fine finish work. Appropriate application materials include oak, pine, melamine, veneer plywood, and delicate molding.
Produces Smooth, Quiet Cuts with Laser-Cut Kerf
The Freud D1280X's clean-cutting design means that you can enjoy the comfort of smooth performance. The thin 0.118-inch kerf between the blade's 80 Hi-ATB (alternate-top bevel) teeth is laser cut to provide ease of feed, so you have more control over the blade's position. This helps maximize both the accuracy of the cut and the efficiency of your work, so you enjoy a job well done and the ability to complete more tasks in less time.
An added bonus, the blade's laser-cut stabilizer vents reduce noise and vibration during operation, keeping your work environment more relaxed and your hands more in control. This feature also reduces friction and warping, helping to extend the blade's cutting life.
Features Shock-Resistant Carbide for Long-Lasting Precision
So you can count on it over the long term, the Freud D1280X is designed for durability. The blade's hardy teeth are protected by Freud's exclusive shock-resistant TiCo Hi-Density Carbide formula, which helps fight wear and tear and maintains blade sharpness up to four times longer than standard carbide. And protecting the blade is Perma-Shield Non-Stick Coating that provides resistance to heat and corrosion.
Fits Miter Saws
The Freud D1280X is a great addition to your workshop because it's designed with the versatility to fit a variety of miter and sliding miter saws.
This product is covered by Freud's Limited Lifetime Warranty.
What's in the Box
Freud D1280X Diablo 12-Inch Fine-Finish Saw Blade.
SAVE NOW on Black Friday offers below!
Available In Stock. |
| This Black Friday Freud D1280X Diablo 12-Inch 80 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
